The flow up to operation is as follows. This chapter describes 1), 2), and 3). 1) 2) 3) Configure a camera to be linked with this product. → 2.3 Configure a camera to be linked with this product 4) Start operation |
1) Access the product's download site and download [AI Processing Relay]. |
|
|
2) Select "Setup" > "Detailed setting" > "Ext. software" > "Software mng." on the WV-S71300-F3. |
3) Click the "Choose File" button and select the downloaded "AIProcessingRelay_vXXX.ext". 4) Confirm that "Install new Ext. software" is selected and click "Execute". Installation of the software starts. When the installation is complete, AI Processing Relay is added to the Extension software list and the Ext. software screen. |
|
|
- AI-VMD (AI Video Motion Detection) - AI People detection - AI Vehicle detection - AI Occupancy Detection |
|
- Set the stream to output MJPEG data. - Set the resolution of the MJPEG data to 1920x1080 or 1280x720. - Set the frame rate of the MJPEG data to 5fps |